Netgear 10GB/S Bidi SFP+ Transceiver 40km Dom Transceiver Module

• Customization: Available
• Usage: Telephone, Computer, Workstation, Server, Mobile phone, Data Center
• Type: Both Wired and Wireless
• Model NO.: T2733(3327)S-ER(I)
• Support Network: Ethernet, GPRS, Data, Voice
• Information content: Data, Voice, Message
• Certification: CE, ISO, RoHS, FCC
• Condition: New
• Transport Package: Blister Pack
• Trademark: Linksall
• Origin: China
• HS Code: 8517706000
• Production Capacity: 100, 000 Per Year
• Package Size: 5.00cm * 5.00cm * 5.00cm
• Package Gross Weight: 1.000kg

Product Description

10Gbps 1510nm SFP+ Transceiver 60KM

Product Features
 

• Up to 11.3Gbps Data Links
• Up to 40km transmission on 9/125μm SMF
• DFB laser and PIN receiver
• Hot-pluggable SFP+ footprint
• Compliant with SFP+ MSA with Simplex LC Receptacle
• Single + 3.3V Power Supply
• Power dissipation<1.2W
• Monitoring Interface Compliant with SFF-8472
• Operating case temperature: Commercial 0 to +70°C, Industrial -40 to +85°C
• Metal Enclosure, Excellent EMI & ESD Protection
• RoHS compliant and Lead Free

Applications
 

• 10Gbps Optical systems
• 10GBASE-ER at 10.3125Gbps
• 10GBASE-EW at 9.953Gbps
• LTE systems
• Other Optical links

Standard
 

• Compliant to IEEE Std 802.3ae 10GBASE-ER/EW, 10GBASE-BX40-U/D
• Compliant with SFF-8472
• Compliant to SFF-8431
• RoHS Compliant.

Product Description

Link-all's 40KM BIDI SFP+ transceivers are high performance, cost effective modules supporting data rateupto 11.3Gbps and 40km transmission distance with SMF.
The SFP+ Module compliants with SFF-8431, SFF-8432 and IEEE 802.3ae 10GBASE-ER. Digitaldiagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472.
The fully SFP compliant form factor provides hot pluggability, easy optical port upgrades and low EMIemission.

Absolute Maximum Ratings

Parameter	Symbol	Min.	Typical	Max.	Unit
Storage Temperature	TS	-40		+85	°C
Maximum Supply Voltage	Vcc	-0.5		3.6	V
Relative Humidity	RH	5		95	%

Recommended Operating Conditions

Parameter		Symbol	Min.	Typ.	Max.	Unit	Note
Case Operating Temperature	Industrial	TOP	-40	-	+85	ºC	Without air flow
	Commercial		0	-	+70
Power Supply Voltage		VCC	3.135	3.3	3.465	V
Power Supply Current		ICC	-		285	mA	Commercial
Data Rate		BR		10.3125	11.3	Gbps
Transmission Distance		TD		-	40	km
Coupled fiber		Single mode fiber					9/125um SMF

Optical and Electrical CharacteristicsNotes:  

Parameter	Symbol		Min	Typical	Max	Unit	Notes
Transmitter
Centre Wavelength		λc	1260	1270	1280	nm	1270nmTx/1330nmRx
			1320	1330	1340		1330nmTx/1270nmRx
Spectral Width(-20dB)		Δλ			1	nm
Side-Mode Suppression Ratio		SMSR	30	-		dB
Average Output Power		Pout	0		+5	dBm
Extinction Ratio		ER	3.5			dB
Return Loss			12			dB
Transmitter OFF Output Power		POff			-30	dBm
Data Input Swing Differential		VIN	200		1000	mV
Input Differential Impedance		RIN	90	100	110	Ω	1
TX Disable	Disable	VD	2.0		Vcc	V
	Enable	VEN	Vee		Vee+0.8	V
Receiver
Input Optical Wavelength		λIN	1320	1330	1340	nm	1270nmTx/1330nmRx
			1260	1270	1280		1330nmTx/1270nmRx
Receiver Sensitivity					-15	dBm	2
Receiver Overload			0.5			dBm
LOS De-Assert		LOSD			-17	dBm
LOS Assert		LOSA	-30			dBm
LOS Hysteresis			0.5			dB
Data Output Swing Differential		Vout	200		1000	mV	3
LOS Fault		VLOS_fault	2		Vcc	V	4
LOS Normal		VLOS_norm	Vee		Vee+0.8	V	4
Power Supply Noise Tolerance		VCCT/VCCR	Per SFF-8431			mVpp

Notes:
1. Connected directly to TX data input pins.AC coupling from pins into laser driver IC.
2. Measured with a PRBS 231-1 test pattern @10312Mbps, BER≤1×10-12.
3. Into 100Ω differential termination.
4. Loss Of Signal is LVTTL. Logic 0 indicates normal operation; logic 1 indicates no signal detected.
Pin Function Definitions Notes: 

Pin	Signal Name	Description	Plug Seq.	Notes
1	VEET	Transmitter Ground	1
2	TX FAULT	Transmitter Fault Indication	3	Note 1
3	TX DISABLE	Transmitter Disable	3	Note 2
4	SDA	SDA Serial Data Signal	3
5	SCL	SCL Serial Clock Signal	3
6	MOD_ABS	Module Absent. Grounded within the module	3
7	RS0	Not Connected	3
8	LOS	Loss of Signal	3	Note 3
9	RS1	Not Connected	3
10	VEER	Receiver ground	1
11	VEER	Receiver ground	1
12	RD-	Inv. Received Data Out	3	Note 4
13	RD+	Received Data Out	3	Note 4
14	VEER	Receiver ground	1
15	VCCR	Receiver Power Supply	2
16	VCCT	Transmitter Power Supply	2
17	VEET	Transmitter Ground	1
18	TD+	Transmit Data In	3	Note 5
19	TD-	Inv. Transmit Data In	3	Note 5
20	VEET	Transmitter Ground	1

Notes:
Plug Seq.: Pin engagement sequence during hot plugging.
1) TX Fault is an open collector output, which should be pulled up with a 4.7k~10kΩ resistor on the hostboard to a voltage between 2.0V and Vcc+0.3V. Logic 0 indicates normal operation; Logic 1 indicates a
laser fault of some kind. In the low state, the output will be pulled to less than 0.8V.
2) Laser output disabled on TDIS >2.0V or open, enabled on TDIS <0.8V.
3) LOS is open collector output. Should be pulled up with 4.7k~10kΩ on host board to a voltage between
2.0V and 3.6V. Logic 0 indicates normal operation; logic 1 indicates loss of signal.
4) RD-/+: These are the differential receiver outputs. They are internally AC-coupled 100 differential lines
which should be terminated with 100Ω (differential) at the user SERDES.
5) TD-/+: These are the differential transmitter inputs. They are internally AC-coupled, differential lines with100Ω differential termination inside the module.

EEPROM Information and Management
The SFP+ transceivers support the 2-wire serial communication protocol as defined in the SFP MSA.
The standard SFP serial ID provides access to identification information that describes the transceiver'scapabilities, standard interfaces, manufacturer, and other information.
Additionally, The SFP+ transceivers provide a unique enhanced digital diagnostic monitoring interface, whichallows real-time access to device operating parameters such as transceiver temperature, laser bias current,transmitted optical power, received optical power and transceiver supply voltage. It also defines asophisticated system of alarm and warning flags, which alerts end-users when particular operatingparameters are outside of a factory set normal range.
The SFP MSA defines a 256-byte memory map in EEPROM that is accessible over a 2-wire serial interface at the 8 bit address 1010000X (A0h).The digital diagnostic monitoring interface makes use of the 8 bitaddress 1010001X (A2h), so the originally defined serial ID memory map remains unchanged.
The operating and diagnostics information is monitored and reported by a Digital Diagnostics TransceiverController (DDTC) inside the transceiver, which is accessed through a 2-wire serial interface. When the serialprotocol is activated, the serial clock signal (SCL, Mod Def 1) is generated by the host. The positive edgeclocks data into the SFP transceiver into those segments of the E2PROM that are not write-protected. Thenegative edge clocks data from the SFP transceiver. The serial data signal (SDA, Mod Def 2) is bi-directionalfor serial data transfer. The host uses SDA in conjunction with SCL to mark the start and end of serialprotocol activation. The memories are organized as a series of 8-bit data words that can be addressedindividually or sequentially.

Table 1- EEPROM Serial ID Memory Contents (A0h)
 

Data Address	Length (Byte)	Name of Length	Description and Contents
Base ID Fields
0	1	Identifier	Type of Serial transceiver (03h=SFP)
1	1	Reserved	Extended identifier of type serial transceiver (04h)
2	1	Connector	Code of optical connector type (07=LC)
3-10	8	Transceiver	10G Base-XX
11	1	Encoding	64B/66B
12	1	BR, Nominal	Nominal baud rate, unit of 100Mbps
13-14	2	Reserved	(0000h)
15	1	Length(9um)	Link length supported for 9/125um fiber, units of 100m
16	1	Length(50um)	Link length supported for 50/125um fiber, units of 10m
17	1	Length(62.5um)	Link length supported for 62.5/125um fiber, units of 10m
18	1	Length(Copper)	Link length supported for copper, units of meters
19	1	Reserved
20-35	16	Vendor Name	SFP+ vendor name
36	1	Reserved
37-39	3	Vendor OUI	SFP+ transceiver vendor OUI ID
40-55	16	Vendor PN	Part Number
56-59	4	Vendor rev	Revision level for part number
60-62	3	Reserved
63	1	CCID	Least significant byte of sum of data in address 0-62
Extended ID Fields
64-65	2	Option	Indicates which optical SFP signals are implemented(001Ah = LOS, TX_FAULT, TX_DISABLE all supported)
66	1	BR, max	Upper bit rate margin, units of %
67	1	BR, min	Lower bit rate margin, units of %
68-83	16	Vendor SN	Serial number (ASCII)
84-91	8	Date code	Manufacturing date code
92-94	3	Reserved
95	1	CCEX	Check code for the extended ID Fields (addresses 64 to 94)
Vendor Specific ID Fields
96-127	32	Readable	Vendor specific data, read only
128-255	128	Reserved	Reserved for SFF-8079

 Digital Diagnostic Monitor Characteristics
 

Data Address	Parameter	Accuracy	Unit
96-97	Transceiver Internal Temperature	±3.0	°C
98-99	VCC3 Internal Supply Voltage	±3.0	%
100-101	Laser Bias Current	±10	%
102-103	Tx Output Power	±3.0	dB
104-105	Rx Input Power	±3.0	dB

Regulatory Compliance
The SFP+ complies with international Electromagnetic Compatibility (EMC) and international safetyrequirements and standards (see details in Table following).

Feature		Performance
Electrostatic Discharge (ESD) to the Electrical Pins		Class 1(>500 V)
Electrostatic Discharge (ESD) to the Simplex LC Receptacle		Compatible with standards
Electromagnetic Interference (EMI)		Compatible with standards
Laser Eye Safety		Class 1 laser product
ROHS		Compatible with standards

Ordering Information

Ordering P/Ns	Description
LASX-T2733S-ER	10Gb/s BIDI SFP+ Transceiver 1270nmTx/1330nmRx 40KM DDM, LC/UPC Receptacle, Commercial Temperature
LASX-T3327S-ER	10Gb/s BIDI SFP+ Transceiver 1330nmTx/1270nmRx 40KM DDM, LC/UPC Receptacle, Commercial Temperature
LASX-T2733S-ERI	10Gb/s BIDI SFP+ Transceiver 1270nmTx/1330nmRx 40KM DDM, LC/UPC Receptacle, Industrial Temperature
LASX-T3327S-ERI	10Gb/s BIDI SFP+ Transceiver 1330nmTx/1270nmRx 40KM DDM, LC/UPC Receptacle, Industrial Temperature

Notes:
1.Default case operating temperature is 0 ~ +70°C. If you need -40 ~ +85°C products, add"I" after Part Number.
2.If you need more customized services, please contact us.
Warnings
Handling Precautions:
This device is susceptible to damage as a result of electrostatic discharge (ESD). A static free environment ishighly recommended. Follow guidelines according to proper ESD procedures.
Laser Safety:
Radiation emitted by laser devices can be dangerous to human eyes. Avoid eye exposure to direct or indirectradiation.
Notice:
The information provided on this page contains the product target specifications which are subject to changewithout notice.
Check with Link-all Sales Office for product updates, changes in specifications, sample availability andproduction release dates.