for Del 10GB/S DWDM SFP+ Transceiver 100km Dom Transceiver Module

• Customization: Available
• Usage: Telephone, Computer, Workstation, Server, Mobile phone, Data Center
• Type: Both Wired and Wireless
• Model NO.: LADX-DxxS-100
• Support Network: Ethernet, GPRS, Data, Voice
• Information content: Data, Voice, Message
• Certification: CE, ISO, RoHS, FCC
• Condition: New
• Transport Package: Blister Pack
• Trademark: Linksall
• Origin: China
• HS Code: 8517706000
• Production Capacity: 100, 000 Per Year
• Package Size: 5.00cm * 5.00cm * 5.00cm
• Package Gross Weight: 1.000kg

Product Description

10Gb/s DWDM SFP+ Transceiver 100KM
LADX-DxxS-100

Product Features
 

• Supports up to 11.3Gbps bit rates
• Hot-pluggable SFP+ footprint
• 100GHz ITU, C Band DWDM Cooled EML laser and APD photodiode, Up to 100km for SMF
  transmission
• Compliant with SFP+ MSA and SFF-8472 with duplex LC receptacle
• Compatible with RoHS
• Single +3.3V power supply
• Real Time Digital Diagnostic Monitoring
• Operating case temperature: Commercial 0 to +70°C, Industrial -40 to +85°C

Applications
 

• 10Gbps DWDM Optical systems
• 10GBASE-ZR at 10.3125Gbps
• 10GBASE-ZW at 9.953Gbps
• 10X Fibre Channel
• LTE systems
• Other Optical links

Product Description
The SFP+ transceivers are high performance, cost effective modules supporting data rate of 10Gbps and100km transmission distance with SMF.
The transceiver consists of three sections: a Cooled EML laser transmitter, an APD photodiode integratedwith a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safetyrequirements.

The transceivers are compatible with SFP Multi-Source Agreement and SFF-8472 digital diagnosticsfunctions.
 

Absolute Maximum Ratings  

Parameter	Symbol	Min.	Typical	Max.	Unit
Storage Temperature	TS	-40		+85	°C
Maximum Supply Voltage	Vcc	-0.5		4.5	V
Relative Humidity	RH	5		85	%

Recommended Operating Conditions

Parameter		Symbol	Min.	Typ.	Max.	Unit	Note
Case Operating Temperature	Commercial	TOP	0	-	+70	ºC	Without air flow
	Industrial		-40	-	+85
Power Supply Voltage		VCC	3.135	3.3	3.465	V
Power Supply Current		ICC	-		600	mA
Data Rate		BR	1.0	10.3	11.3	Gbps
Transmission Distance		TD		-	100	km
Coupled fiber		Single mode fiber					9/125um SMF

Optical and Electrical Characteristics

Parameter		Symbol	Min	Typical	Max	Unit	Notes
Transmitter
Centre Wavelength		λc	1528.77		1563.86	nm
Spectral Width(-20dB)		Δλ			1	nm
Side-Mode Suppression Ratio		SMSR	30	-		dB
Average Output Power		Pout	0		+4.0	dBm	1
Extinction Ratio		ER	6.0			dB
Data Input Swing Differential		VIN	180		850	mV	2
Input Differential Impedance		ZIN	90	100	110	Ω
TX Disable	Disable		2.0		Vcc	V
	Enable		0		0.8	V
TX Fault	Fault		2.0		Vcc	V
	Normal		0		0.8	V
Receiver
Centre Wavelength		λc	1450		1620	nm
Receiver Sensitivity					-24	dBm	3
Receiver Overload			-7			dBm	3
LOS De-Assert		LOSD			-25	dBm
LOS Assert		LOSA	-35			dBm
LOS Hysteresis			0.5			dB
Data Output Swing Differential		Vout	300		900	mV	4
LOS	High		2.0		Vcc	V
	Low				0.8	V

Notes:
1. The optical power is launched into SMF.
2. PECL input, internally AC-coupled and terminated.
3. Measured with a PRBS 231-1 test pattern @10312Mbps, BER≤1×10-124. Internally AC-coupled.

Timing and Electrical

Parameter	Symbol	Min	Typical	Max	Unit
Tx Disable Negate Time	t_on			2	ms
Tx Disable Assert Time	t_off			100	µs
Time To Initialize, including Reset of Tx Fault	t_init			300	ms
Tx Fault Assert Time	t_fault			100	µs
Tx Disable To Reset	t_reset	10			µs
LOS Assert Time	t_loss_on			100	µs
LOS De-assert Time	t_loss_off			100	µs
Serial ID Clock Rate	f_serial_clock		100	400	KHz
MOD_DEF (0:2)-High	VH	2		Vcc	V
MOD_DEF (0:2)-Low	VL			0.8	V

Pin Function Definitions

Pin	Signal Name	Description	Plug Seq.	Notes
1	VEET	Transmitter Ground	1
2	TX FAULT	Transmitter Fault Indication	3	Note 1
3	TX DISABLE	Transmitter Disable	3	Note 2
4	SDA	SDA Serial Data Signal	3
5	SCL	SCL Serial Clock Signal	3
6	MOD_ABS	Module Absent. Grounded within the module	3
7	RS0	Not Connected	3
8	LOS	Loss of Signal	3	Note 3
9	RS1	Not Connected	3
10	VEER	Receiver ground	1
11	VEER	Receiver ground	1
12	RD-	Inv. Received Data Out	3	Note 4
13	RD+	Received Data Out	3	Note 4
14	VEER	Receiver ground	1
15	VCCR	Receiver Power Supply	2
16	VCCT	Transmitter Power Supply	2
17	VEET	Transmitter Ground	1
18	TD+	Transmit Data In	3	Note 5
19	TD-	Inv. Transmit Data In	3	Note 5
20	VEET	Transmitter Ground	1

Notes:
Plug Seq.: Pin engagement sequence during hot plugging.
1) TX Fault is an open collector output, which should be pulled up with a 4.7k~10kΩ resistor on the hostboard to a voltage between 2.0V and Vcc+0.3V. Logic 0 indicates normal operation; Logic 1 indicates a
laser fault of some kind. In the low state, the output will be pulled to less than 0.8V.
2) Laser output disabled on TDIS >2.0V or open, enabled on TDIS <0.8V.
3) LOS is open collector output. Should be pulled up with 4.7k~10kΩ on host board to a voltage between
2.0V and 3.6V. Logic 0 indicates normal operation; logic 1 indicates loss of signal.
4) RD-/+: These are the differential receiver outputs. They are internally AC-coupled 100 differential lines
which should be terminated with 100Ω (differential) at the user SERDES.
5) TD-/+: These are the differential transmitter inputs. They are internally AC-coupled, differential lines with100Ω differential termination inside the module.

EEPROM Information and Management
The SFP+ transceivers support the 2-wire serial communication protocol as defined in the SFP MSA.
The standard SFP serial ID provides access to identification information that describes the transceiver'scapabilities, standard interfaces, manufacturer, and other information.
Additionally, The SFP+ transceivers provide a unique enhanced digital diagnostic monitoring interface, whichallows real-time access to device operating parameters such as transceiver temperature, laser bias current,transmitted optical power, received optical power and transceiver supply voltage. It also defines asophisticated system of alarm and warning flags, which alerts end-users when particular operatingparameters are outside of a factory set normal range.
The SFP MSA defines a 256-byte memory map in EEPROM that is accessible over a 2-wire serial interfaceat the 8 bit address 1010000X (A0h).The digital diagnostic monitoring interface makes use of the 8 bitaddress 1010001X (A2h), so the originally defined serial ID memory map remains unchanged.
The operating and diagnostics information is monitored and reported by a Digital Diagnostics TransceiverController (DDTC) inside the transceiver, which is accessed through a 2-wire serial interface. When the serialprotocol is activated, the serial clock signal (SCL, Mod Def 1) is generated by the host. The positive edgeclocks data into the SFP transceiver into those segments of the E2PROM that are not write-protected. Thenegative edge clocks data from the SFP transceiver. The serial data signal (SDA, Mod Def 2) is bi-directionalfor serial data transfer. The host uses SDA in conjunction with SCL to mark the start and end of serialprotocol activation. The memories are organized as a series of 8-bit data words that can be addressedindividually or sequentially.
Table 1.EEPROM Serial ID Memory Contents (A0h)

Data Address	Length (Byte)	Name of Length	Description and Contents
Base ID Fields
0	1	Identifier	Type of Serial transceiver (03h=SFP)
1	1	Reserved	Extended identifier of type serial transceiver (04h)
2	1	Connector	Code of optical connector type (07=LC)
3-10	8	Transceiver	10G Base-XX
11	1	Encoding	64B/66B
12	1	BR, Nominal	Nominal baud rate, unit of 100Mbps
13-14	2	Reserved	(0000h)
15	1	Length(9um)	Link length supported for 9/125um fiber, units of 100m
16	1	Length(50um)	Link length supported for 50/125um fiber, units of 10m
17	1	Length(62.5um)	Link length supported for 62.5/125um fiber, units of 10m
18	1	Length(Copper)	Link length supported for copper, units of meters
19	1	Reserved
20-35	16	Vendor Name	SFP+ vendor name
36	1	Reserved
37-39	3	Vendor OUI	SFP+ transceiver vendor OUI ID
40-55	16	Vendor PN	Part Number
56-59	4	Vendor rev	Revision level for part number
60-62	3	Reserved
63	1	CCID	Least significant byte of sum of data in address 0-62
Extended ID Fields
64-65	2	Option	Indicates which optical SFP signals are implemented(001Ah = LOS, TX_FAULT, TX_DISABLE all supported)
66	1	BR, max	Upper bit rate margin, units of %
67	1	BR, min	Lower bit rate margin, units of %
68-83	16	Vendor SN	Serial number (ASCII)
84-91	8	Date code	Manufacturing date code
92-94	3	Reserved
95	1	CCEX	Check code for the extended ID Fields (addresses 64 to 94)
Vendor Specific ID Fields
96-127	32	Readable	Vendor specific data, read only
128-255	128	Reserved	Reserved for SFF-8079

Digital Diagnostic Monitor Characteristics

Data Address	Parameter	Accuracy	Unit	Range
96-97	Transceiver Internal Temperature	±3.0	°C	0 to +70
98-99	VCC3 Internal Supply Voltage	±3.0	%	3.0 to 3.6
100-101	Laser Bias Current	±10	%	0 to 100
102-103	Tx Output Power	±3.0	dB	-1 to +5
104-105	Rx Input Power	±3.0	dB	-23 to -6

Regulatory Compliance
The SFP+ complies with international Electromagnetic Compatibility (EMC) and international safetyrequirements and standards (see details in Table following).

Feature	Reference	Performance
Electrostatic discharge(ESD)	IEC/EN 61000-4-2	Compatible with standards
Electromagnetic Interference (EMI)	FCC Part 15 Class B EN 55022 Class B (CISPR 22A)	Compatible with standards
Laser Eye Safety	FDA 21CFR 1040.10, 1040.11 IEC/EN 60825-1,2	Class 1 laser product
Component Recognition	IEC/EN 60950, UL	Compatible with standards
ROHS	2002/95/EC	Compatible with standards
EMC	EN61000-3	Compatible with standards

Ordering Information

Ordering P/Ns	Description
LADX-DxxS-100	10Gb/s DWDM SFP+ Transceiver 100KM DDM, LC/UPC Receptacle, Commercial Temperature

Notes:
1. In the part number, xx refers to the ITU Channel Product Code.
2. Default case operating temperature is 0 ~ +70°C. If you need -40 ~ +85°C products, add"I" after Part
Number.
3. If you need more customized services, please contact us.

λC Wavelength Guide 100GHz ITU Grid, C Band
ITU Channel Product Code	Frequency(THz)	Wavelength	ITU Channel Product Code	Frequency(THz)	Wavelength
17	191.70	1563.86	40	194.00	1545.32
18	191.80	1563.05	41	194.10	1544.53
19	191.90	1562.23	42	194.20	1543.73
20	192.00	1561.42	43	194.30	1542.94
21	192.10	1560.61	44	194.40	1542.14
22	192.20	1559.79	45	194.50	1541.35
23	192.30	1558.98	46	194.60	1540.56
24	192.40	1558.17	47	194.70	1539.77
25	192.50	1557.36	48	194.80	1538.98
26	192.60	1556.55	49	194.90	1538.19
27	192.70	1555.75	50	195.00	1537.40
28	192.80	1554.94	51	195.10	1536.61
29	192.90	1554.13	52	195.20	1535.82
30	193.00	1553.33	53	195.30	1535.04
31	193.10	1552.52	54	195.40	1534.25
32	193.20	1551.72	55	195.50	1533.47
33	193.30	1550.92	56	195.60	1532.68
34	193.40	1550.12	57	195.70	1531.90
35	193.50	1549.32	58	195.80	1531.12
36	193.60	1548.51	59	195.90	1530.33
37	193.70	1547.72	60	196.00	1529.55
38	193.80	1546.92	61	196.10	1528.77
39	193.90	1546.12	-	-	-

Warnings
Handling Precautions:
This device is susceptible to damage as a result of electrostatic discharge (ESD). A static free environment ishighly recommended. Follow guidelines according to proper ESD procedures.
Laser Safety:
Radiation emitted by laser devices can be dangerous to human eyes. Avoid eye exposure to direct or indirectradiation.
Notice:
The information provided on this page contains the product target specifications which are subject to changewithout notice.
Check with Link-all Sales Office for product updates, changes in specifications, sample availability andproduction release dates.