800g Osfp 850nm-50m (FEC) -mm-Twin MTP/MPO Optical Module Transceiver

• Customization: Available
• Usage: Telephone, Computer, Workstation, Server, Mobile phone, Data Center
• Type: Both Wired and Wireless
• Model NO.: LAOS-SR8AF-800G
• Support Network: Ethernet
• Information content: Data, Voice, Message
• Certification: CE, ISO, RoHS, FCC
• Condition: New
• Certificates: CE, FCC, RoHS
• Material: Alloy Zinc
• Storage: in Stock
• Transport Package: Blister Pack
• Specification: Size: 22*20*8CM
• Trademark: Link-All
• Origin: China
• HS Code: 8517795000
• Production Capacity: 100, 000 Per Year
• Package Size: 22.00cm * 20.00cm * 8.00cm
• Package Gross Weight: 0.500kg

Product Description

800G OSFP 850nm-50M(FEC)-MM-Twin MTP/MPO APC Polish, Finned top Optical Module Transceiver
LAOS-SR8AF-800G

Product Features
 

Based on PAM-4 Modulation
IEEE 802.3 Compliant
MSA and CMIS compliant
Multi Transmitting Reach Available
Some with FEC Function Built in the DSP
High-density and Increased Integration
Low Latency and Easy Deployment
Meet the Rapid Growth of Network Bandwidth
Compact Size and Hot-pluggable
Flat-top or Finned-top Form Factor
RoHS Compliant

Applications
 

Our products have been extensively used worldwide in Central Office, Data Center,Metro Network, Boadband Access Network,TV Broadcasting Network, Power GrNetwork, Mobile Network and so on.

Product Pictures



Standard
 

• MSA and CMIS compliant
• RoHS Compliant.

Absolute Maximum Ratings  

Parameter	Symbol	Min.	Typ.	Max.	Unit	Note
Storage Temperature	Ts	-40	-	85	ºC
Relative Humidity	RH	5	-	95	%
Power Supply Voltage	VCC	-0.3	-	4	V
Signal Input Voltage		Vcc-0.3	-	Vcc+0.3	V

Recommended Operating Conditions

Parameter	Symbol	Min.	Typ.	Max.	Unit	Note
Case Operating Temperature	Tcase	0	-	70	ºC	Without air flow
Power Supply Voltage	VCC	3.14	3.3	3.47	V
Power Supply Current	ICC	-		450	mA
Data Rate	BR		10.3125		Gbps
Transmission Distance	TD		-	10	km
Coupled fiber	Single mode fiber					9/125um SMF

Optical Characteristics

Parameter	Symbol	Min	Typ	Max	Unit	NOTE
Transmitter
Output Opt. Power	POUT	-6		-0.5	dBm	1
Optical Wavelength	λ	1260	1310	1355	nm
Spectral Width (-20dB)	σ			1	nm
Optical Extinction Ratio	ER	3.5			dB
Output Eye Mask	Compliant with IEEE 802.3ae
Receiver
Rx Sensitivity	RSENS			-14.4	dBm	2
Input Saturation Power (Overload)	Psat	0.5			dBm
Wavelength Range	λC	1270		1610	nm
LOS De -Assert	LOSD			-17	dBm
LOS Assert	LOSA	-30			dBm
LOS Hysteresis		0.5	1.0		dB

Notes:  

1. Class 1 Laser Safety per FDA/CDRH and IEC-825-1 regulations.  
2. Measured with a PRBS 2³¹-1 test pattern, @10.325Gb/s, BER<10^-12 . 

Electrical Characteristics

Parameter	Symbol	Min	Typ	Max	Unit	NOTE
Supply Voltage	Vcc	3.14	3.3	3.46	V
Supply Current	Icc			450	mA
Transmitter
Input differential impedance	Rin		100		Ω	1
Single ended data input swing	Vin,pp	180		700	mV
Transmit Disable Voltage	VD	Vcc-1.3		Vcc	V
Transmit Enable Voltage	VEN	Vee		Vee+ 0.8	V	2
Transmit Disable Assert Time				10	us
Receiver
Differential data output swing	Vout,pp	300		850	mV	3
Data output rise time	tr	28			ps	4
Data output fall time	tf	28			ps	4
LOS Fault	VLOS fault	Vcc-1.3		VccHOST	V	5
LOS Normal	VLOS norm	Vee		Vee+0.8	V	5
Power Supply Rejection	PSR	100			mVpp	6

Notes: 

1. Connected directly to TX data input pins. AC coupled thereafter.  
2. Or open circuit.  
3. Into 100 ohms differential termination.  
4. 20 - 80 %.
5. Loss of Signal is LVTTL. Logic 0 indicates normal operation; logic 1 indicates no signal detected.  
6. Receiver sensitivity is compliant with power supply sinusoidal modulation of 20 Hz to 1.5 MHz up to specified value applied through the recommended power supply filtering network.  

Pin Assignment
 
   Pin out of Connector Block on Host Board
 

Pin	Symbol	Name/Description	NOTE
1	VEET	Transmitter Ground (Common with Receiver Ground)	1
2	TFAULT	Transmitter Fault.	2
3	TDIS	Transmitter Disable. Laser output disabled on high or open.	3
4	SDA	2-wire Serial Interface Data Line	4
5	SCL	2-wire Serial Interface Clock Line	4
6	MOD_ABS	Module Absent. Grounded within the module	4
7	RS0	Rate Select 0	5
8	LOS	Loss of Signal indication.  Logic 0 indicates normal operation.	6
9	RS1	No connection required	1
10	VEER	Receiver Ground (Common with Transmitter Ground)	1
11	VEER	Receiver Ground (Common with Transmitter Ground)	1
12	RD-	Receiver Inverted DATA out.  AC Coupled
13	RD+	Receiver Non-inverted DATA out.  AC Coupled
14	VEER	Receiver Ground (Common with Transmitter Ground)	1
15	VCCR	Receiver Power Supply
16	VCCT	Transmitter Power Supply
17	VEET	Transmitter Ground (Common with Receiver Ground)	1
18	TD+	Transmitter Non-Inverted DATA in. AC Coupled.
19	TD-	Transmitter Inverted DATA in.  AC Coupled.
20	VEET	Transmitter Ground (Common with Receiver Ground)	1

Notes:

1. Circuit ground is internally isolated from chassis ground.
2. T_FAULT is an open collector/drain output, which should be pulled up with a 4.7k - 10k Ohms resistor on the host board if intended for use. Pull up voltage should be between 2.0V to Vcc + 0.3V.A high output indicates a transmitter fault caused by either the TX bias current or the TX output power exceeding the preset alarm threshold. A low output indicates normal operation. In the low state, the output is pulled to <0.8V.
3. Laser output disabled on T_DIS >2.0V or open, enabled on T_DIS <0.8V.
4. Should be pulled up with 4.7kΩ- 10kΩ host board to a voltage between 2.0V and 3.6V. MOD_ABS pulls line low to indicate module is plugged in.
5. Internally pulled down per SFF-8431 Rev 4.1.
6. LOS is open collector output. It should be pulled up with 4.7kΩ - 10kΩ on host board to a voltage between 2.0V and 3.6V. Logic 0 indicates normal operation; logic 1 indicates loss of signal.

Digital Diagnostic Functions
    The transceivers support the 2-wire serial communication protocol as defined in the SFP+ MSA.
    The standard SFP serial ID provides access to identification information that describes the transceiver's capabilities, standard interfaces, manufacturer, and other information. 
    Additionally, SFP+ transceivers provide a unique enhanced digital diagnostic monitoring interface, which allows real-time access to device operating parameters such as transceiver temperature, laser bias current, transmitted optical power, received optical power and transceiver supply voltage. It also defines a sophisticated system of alarm and warning flags, which alerts end-users when particular operating parameters are outside of a factory set normal range.
    The SFP MSA defines a 256-byte memory map in EEPROM that is accessible over a 2-wire serial interface at the 8bit address 1010000X (A0h).The digital diagnostic monitoring interface makes use of the 8 bit address 1010001X (A2h), so the originally defined serial ID memory map remains unchanged.
    The operating and diagnostics information is monitored and reported by a Digital Diagnostics Transceiver Controller (DDTC) inside the transceiver, which is accessed through a 2-wire serial interface. When the serial protocol is activated, the serial clock signal (SCL, Mod Def 1) is generated by the host. The positive edge clocks data into the SFP transceiver into those segments of the E2PROM that are not write-protected. The negative edge clocks data from the SFP transceiver.  The serial data signal (SDA, Mod Def 2) is bi-directional for serial data transfer. The host uses SDA in conjunction with SCL to mark the start and end of serial protocol activation. The memories are organized as a series of 8-bit data words that can be addressed individually or sequentially.
 
Company info.
Link-all is one of the leading manufacturers for optical communication products such as all kinds of transceivers from 1.25G, 2.5G, 10G, 25G, 40G, 100G to 400G, CWDM and DWDM MUX/ DEMUX, PLC Splitters, Media Converters…we have been supplying our products to big telecom operators/Network equipment providers such as China Mobile, Hutchison, Viavi Solutions, TPG, NEC, PCCW, i-Cable, HKBN, Towngas Telecom, HK Electrics, CTM etc., also some telco companies in Singapore, Japan, Europe, North America and South America for quite a few years, so the reliability and durability of our products have been proved very good and cost effective.