SFP 10/100/1000baset Copper SFP Arista Cisco Network 100m RJ45 Support Link Indication Function Industial Temp

• Customization: Available
• Type: Fiber Transceiver
• Wiring Devices: Integrated Wiring
• Model NO.: LASFP-24-1111FI
• Certification: CE, ISO, RoHS
• Condition: New
• Transport Package: Blister Pack
• Trademark: Link-all
• Origin: China
• HS Code: 8517795000
• Production Capacity: 100, 000 Per Year
• Package Size: 22.00cm * 20.00cm * 8.00cm
• Package Gross Weight: 0.500kg

Product Description

10/100/1000Base-T SFP Copper Transceiver

LASFP-24-1111F(I)

Features:
 

1. 1.25Gbps data rate (100/100/1000M Auto-Negotiation)
2. Link lengths at 1.25 Gb/s up to 100 meters

3. 1000 BASE-T operation in host systems with SERDES interface

4. Single +3.3V power supply

5. Low power dissipation(1.05W typical)

6. Hot-pluggable

7. Metal enclosure, for lower EMI

8. Compact RJ-45 connector assembly

9. Operating temperature range: 0~70ºC/-40~85ºC
10. RoHS Compliant

11. No support TX_ disable and with Link function

 

Applications

1. LAN 1000Base-T
2. Switch to Switch Interface
3. Router/Server interface
4. Switched backplane applications

Standard

1. Compliant with SFP MSA

2. Complies with IEEE802.3z
 

Absolute Maximum Ratings


 

Parameter	Symbol	Min	Max	Unit
Storage temperature	TS	-40	85	ºC
Power Supply Voltage	Vcc	-0.5	+3.6	V
Relative Humidity	RH	5	95	%

Recommended Operating Conditions


Power Supply Interface Electrical Characteristics

Notes:

1. Power consumption and surge current are higher than the specified values in the SFP MSA

 

Electronic Characteristics

 

General Specifications


 

Parameter	Symbol	Min	Typical	Max	Unit	Notes
Data Rate	BR	10		1000	Mb/s	IEEE 802.3 compatible
Cable Length	L			100	m	Category 5 UTP. BER<10-12

Notes:

1.Clock tolerance is +/- 50 ppm.

2.By default, the LASFP-24-1111F(I) is a full duplex device in preferred master mode.

3.Automatic crossover detection is enabled. External crossover cable is not required.

4.By default, 1000 BASE-T operation requires the host system to have an SERDES interface with no clocks.

Pin Function Definitions

Notes:

1. Circuit ground is connected to chassis ground.

2. Should be pulled up with 4.7k - 10k Ohms on host board to a voltage between 2.0 V and 3.6 V. MOD_DEF

(0) pulls line low to indicate module is plugged in.

3. LVTTL compatible with a maximum voltage of 2.5V.
 

Serial Communication Protocol

LASFP-24-1111F(I) supports the 2-wire serial communication protocol outlined in the SFP MSA. It usesan

Atmel AT24C02D 256 byte EEPROM with an address of A0h
 

Parameter	Symbol	Min	Typical	Max	Unit	Notes
I 2C Clock Rate		0		100000	Hz

Outline Dimensions

 

Ordering Information

 

Part Number	Link Indicator on RX_LOS PIN	10/100/1000M Auto-negotiation	DDM	Operating temperature
LASFP-24-1111F	Yes	Yes	No	0~70ºC
LASFP-24-1111FI	Yes	Yes	No	-40~85ºC

 

Notes:

If you need more customized services, please contact us.
 

Notice:

The information provided on this page contains the product target specifications which are subject to change

without notice.

Check with Link-all Sales Office for product updates, changes in specifications, sample availability and production release dates.